• 1.5" Round
• Zinc-plated steel strainer
• Can be used with electric and gas powered water and trash pumps
• Round or square hole
• NPT threads

Shipping and Handling:  $19.00

• 2" Round
• Zinc-plated steel strainer
• Can be used with electric and gas powered water and trash pumps
• Round or square hole
• NPT threads

Shipping and Handling:  $19.00

• 3" Round
• Zinc-plated steel strainer
• Can be used with electric and gas powered water and trash pumps
• Round or square hole
• NPT threads

Shipping and Handling:  $19.00

• 4" Round
• Zinc-plated steel strainer
• Can be used with electric and gas powered water and trash pumps
• Round or square hole
• NPT threads

Shipping and Handling:  $19.00

• Pumps up to 650 GPH ... pushes water 99 feet
• Fits a garden hose, can run dry without damaging pump
• Fits electric drill or AC/DC motor with #10902 coupler
• Pumps water and many other liquids
• 5 1/2in. from inlet to outlet, 3 1/2in. thick x 3in. high
• With repair kit and suction strainer
• 2000–3000 RPM Maximum
• Drill should have at least 350W rating
• Hose diameter required: 20MM
• Maximum inlet head: 6ft. vertical above surface
• Maximum pumping head: 50ft.
• Delivery pressure: 28 PSI
• 5/8in. fittings on both inlet and outlet
• Can be used with: Fresh water, Sea water, Organic solvents, Motor oil, Insecticides, Liquid fertilizers and more! 
• Liquid Temp: 35–220 degrees F
• 1 Year Manufacturer's Warranty

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• 1740 Gallons Per Hour (GPH)
• 1/5 Horsepower motor - oil-cooled
• Drains water to 1/8" of surface
• Handles 1/2" solids with ease 
• Quick Disconnect 8 foot Power Cord
• 6.2 Amp Draw
• Thermal-overload protected to prevent burn out
• 3/4" adjustable side discharge elbow
• 1 Year Limited Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Hand-powered pump provides an inexpensive way to draw well water from up to 23'
• Threaded for 1.25" pipe
• Overall Height: 54"
• Pump is 26.5".
• Mounting base: 9.75"
• Bolt hole diameter: 1/2"
• 4 mounting holes
• Does not include hardware to attach to base
• 1 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 1,920 Gallons Per Hour (GPH)
• Belt Driven High Pressure Water Pump
• 148' maximum total head
• Handles solid particles up to 1/8"
• Manufactured with silicon carbide seals which are the longest lasting mechanical seals!
• Cast iron impeller and volute are super strong and wear resistant
• 1 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 7,920 Gallons Per Hour (GPH)
• Belt Driven High Pressure Water Pump
• 164' maximum total head
• Handles solid particles up to 1/8"
• Manufactured with silicon carbide seals which are the longest lasting mechanical seals!
• Cast iron impeller and volute are super strong and wear resistant
• 1 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• 1,590 Gallons Per Hour (GPH)
• .8 Horsepower (19.8cc 2-Cycle) engine - oil-cooled
• Efficient, lightweight pump is powered by an .8 Hp Mitsubishi engine with technologically advanced 2-stroke design
• EPA and CARB approved
• Aluminum die-cast pump parts
• Delivers 1590 GPH (100 L/M)
• Suction size: 1"
• Discharge size: 1"
• Total head: 115' (35m)
• Maximum suction head: 26' (8m)
• Shaft is sealed by ceramic-carbon mechanical seal
• Built-in check valve
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 12,000 Gallons Per Hour (GPH)
• 5.5 HP Briggs & Stratton Gasoline Engine
• Water and chemical transfer pump
• 125' head
• Self-priming thermo plastic pump with glass reinforced polyester housing
• Ideal for clear water, chemical and herbicide transfer
• Carrying handle
• EPDM O-rings and seals
• Pump is self-priming
• Maximum Total Head: 125'
• Maximum Suction Lift: 25'
• 2" suction and discharge ports (inlet/outlet)
• Moves up to 12,000 GPH / 200 GPM
• Starting Method: Recoil
• PSI Maximum: 52 PSI
• Stainless steel internal and external fasteners and check valve
• Thermo plastic pump with glass reinforced polyester housing, impeller and volute
• Dimensions: 18" L x 16.5" W x 14.5" H
• 1 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 9,511 Gallons Per Hour (GPH)
• 4.5 Horsepower Gasoline Engine
• Compact, lightweight pump with self-priming feature is powered by a 4.5 HP Robin EX13 commercial-grade engine that will run 2 times longer than most other comparable engines
• Standard cast iron impeller and volute last long in clear water applications
• 9,511 GPH maximum flow
• 98' maximum total head
• 26' maximum suction lift
• 1/8" maximum solid size
• Carbon ceramic mechanical seal resists wear and heat
• Cast iron impeller and volute
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 15,376 Gallons Per Hour (GPH)
• 6 Horsepower Gasoline Engine
• Compact, lightweight pump with self-priming feature is powered by a 6 HP Robin EX17 commercial-grade engine that will run 2 times longer than most other comparable engines
• Standard cast iron impeller and volute last long in clear water applications
• 15,376 GPH maximum flow
• 102' maximum total head
• 26' maximum suction lift
• 1/8" maximum solid size
• Carbon ceramic mechanical seal resists wear and heat
• Cast iron impeller and volute
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 11,376 Gallons Per Hour (GPH)
• 4.0 Horsepower Honda Gasoline Engine
• 11,376 GPH maximum flow
• 98' maximum total head
• 28' suction lift
• 3/4" maximum solid size
• Inlet: 2"
• Outlet: 2" 
• Engine: GX-160 Honda
• Comes with FREE wrench and strainer!
• Powerful pump is light, compact and efficient.
• Quiet, dependable 4 Hp Honda OHV engine turns at 4000 RPM
• Silicon carbide mechanical seal lasts many times longer than ceramic seals - being far more resistant to corrosion, wear and heat
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Heavy Duty 7,920 GPH Water Pump
• This high pressure system operates at 80 PSI
• Designed for fresh water applications
• Extra-low vibration and noise levels
• Efficiency: 7,920 Gallons Per Hour (GPH)
• Engine: 4 Hp Mitsubishi GM-132 - delivers dependable, efficient power
• Carbon ceramic mechanical seal resists wear and heat
• Cast iron impeller
• 2" inlet and outlet
• Maximum Total Head: 164'
• Maximum Suction Head: 26'
• Maximum Solids: 1/8" Diameter
• Ship Weight: 131 Lbs
• 2 Year Manufacturer's Warranty (Includes Parts & Labor)
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 6,960 Gallons Per Hour (GPH)
• 5.5 Horsepower Honda Gasoline Engine
• 9,511 GPH maximum flow
• 187' maximum total head
• 1/8" maximum solid size
• Engine: GX-160 Honda
• Handles solid particles up to 1/8"
• Includes silicon carbide seals which are the longest lasting mechanical seals
• Cast iron impeller and volute are super strong and wear resistant
• Frame Color: Orange
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 16,200 Gallons Per Hour (GPH)
• 5.5 Horsepower Honda Gasoline Engine
• 16,200 GPH maximum flow
• 85' maximum total head
• 26' suction lift
• 3/4" maximum solid size
• Inlet: 2"
• Outlet: 2" 
• Honda Engine: GX-160
• Pump is self-priming
• Long-life silicon carbide mechanical seal resists corrosion, wear and heat much longer than a standard seal
• FCD45 cast iron impeller and volute last longer for semi-trash applications
• FREE accessories include strainer and wrench
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 11,000 Gallons Per Hour (GPH)
• 5.5 Horsepower Honda Gasoline Engine
• 80' maximum total head
• 26' suction lift
• 3/4" maximum solid size
• Inlet: 2"
• Outlet: 2" 
• Engine: GX-160 Honda
• Self-priming
• Quiet, reliable OHV Honda 5.5 HP engine
• Cast iron pump casing lined with stainless steel
• Silicon carbide mechanical seal
• Cast iron impeller
• Centrifugal design
• Adjustable impeller height
• Includes strainer
• Ship Weight: 134 lbs
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  $139.00

• Heavy Duty 8,200 GPH Water Pump with 2" Suction & Discharge Ports
• Capacity: 8,200 Gallons Per Hour (GPH)
• Engine: 6.5 Hp Briggs & Stratton Intek Gasoline Engine
• Ideal for fire-fighting and other high volume needs
• Engine features a cast iron cylinder, dual element air cleaner and Oil Alert™
• Inlet & Outlet: 2"
• Pump runs 1.5 hours on a 3 quart tankful
• Pump is self-priming
• Maximum Total Head: 200'
• Maximum Suction Lift: 18'
• Maximum PSI: 88 
• Starting Method: Recoil
• Low Oil Alert
• Light weight die cast aluminum housing
• Cast iron volute
• Nylon Zytel plastic impeller 
• Dimensions: 18.5" L x 16.5" W x 15.25" H
• Ship Weight: 96 Lbs 
• 1 Year Manufacturer's Warranty (Includes Parts & Labor)
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Heavy Duty 8,200 GPH Water Pump with a 5.5 Hp Honda Engine
• Capacity: 8,200 Gallons Per Hour (GPH)
• Engine: 5.5 Hp Honda Gasoline Engine
• Ideal for fire-fighting and other high volume needs
• Engine features a cast iron cylinder, dual element air cleaner and Oil Alert™
• Inlet & Outlet: 2"
• EPDM gaskets and seals
• Pump runs 1.5 hours on a 3 quart tankful
• Pump is self-priming
• Maximum Total Head: 200'
• Maximum Suction Lift: 18'
• Starting Method: Recoil
• Low Oil Alert
• Light weight die cast aluminum housing
• Cast iron impeller and volute
• Dimensions: 22.7" L x 18.8" W x 17.3" H
• Ship Weight: 91 Lbs 
• 1 Year Manufacturer's Warranty (Includes Parts & Labor)
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Capacity: 21,158 Gallons Per Hour (GPH)
• 8.0 Horsepower Honda Gasoline Engine
• 93' maximum total head
• 26' suction lift
• 1-1/4" maximum solid size
• Inlet: 3"
• Outlet: 3" 
• Engine: GX-240 Honda
• Powerful OHV Honda engine with Oil Alert
• Self priming
• Ship Weight: 165 lbs
• 2 Year Manufacturer's Warranty
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.

• Commercial Heavy Duty 2,000 GPH Water Pump
• Removes rainwater ponding at construction sites, efficiently drains septic tanks, and pumps waste with up to 3/4" solids
• Extra-low vibration and noise levels
• Efficiency: 2,000 GPH
• Engine: 4 Hp Honda OHV - delivers dependable, efficient power
• Heavy duty cast aluminum pump body and gear case
• Replaceable rubber diaphragm and check valve
• Maintenance free grease filled gear unit
• 2" inlet and outlet
• Maximum Total Head: 50'
• Maximum Suction Head: 25'
• Maximum Solids: 3/4" Diameter
• Overall Dimensions: 24" L x 15" W x 20" H
• Ship Weight: 111 Lbs
• 1 Year Manufacturer's Warranty (Includes Parts & Labor)
• Made in the U.S.A.

Shipping and Handling:  FREE SHIPPING to Anywhere in the Contiguous United States – All Other Locations Please Contact us for a Freight Quote.